SFH series
Feeding Hoppers
Hoppers are secondary stage feeding and product loading capacity of the the crushing-screening line. Usually, hoppers are used for middle size product loading where pressure and wear rate are lower than primary stage. Hoppers are installed before feeding of secondary and tertiary stage crusher for accurate and smooth feeding.
*** Hoppers are stone loading containers which keep and feed the product with a slow and constant speed to the next part of the crushing-screening line.
*** Lower part of the hopper is narrowed and equipped with a small vibrating feeder, which controls the feeding speed of the product.
*** Speed control of the vibrating feeder can be adjusted from control panel, which regulates rotation speed of the vibromotor.
*** Depending on installation place, hoppers can be used at primary or secondary stages.
*** When hopper is used as primary, it is intalled on a ground concrete with a standart height, so that loader or excavator can load.
*** When it is used as secondary, hoppers are installed above crusher, so that primary output conveyor feeds the hopper, and from hopper feeder directly to the crusher inlet.
--- TECHNICAL DETAILS TABLE ---
A | B | C | D | E |
|---|---|---|---|---|
MODEL | LOADING
VOLUME | MOTOR
POWER | HOPPER
DIMENSIONS | TOTAL
WEIGHT |
SFH 10 | 10 m3 | 2 x 1.5 kW | 2.4 x 3 x 1.2 m | 4000 kg |
SFH 20 | 20 m3 | 2 x 1.5 kW | 3 x 4 x 1.5 m | 5900 kg |
SFH 30 | 30 m3 | 2 x 2 kW | 3 x 4 x 2.5 m | 7500 kg |
--- GALLERY ---
